Welcome to Liquid Connections Pty Ltd


Online shop in Australia



Dmfit has a very good resistance to inorganic chemicals, oils and fats and synthetic detergents.
As it is also resistant to inorganic chemicals, except for some very strongly acidic chemicals, it offers a broad range of application.
Resistance of chemical characteristics for plastic resins & elastomers
Description (%,) Brass SUS Resin Rubber
Acetal PP NBR EPDM
Caustic soda(10%,20)
Gasoline
Formic acid(25%,20)
 Air
 Mineral oil
 Grease
Sodium silicate -
Glycerin
 Naphtha
 Aminal oil(Lard oil) -
Kerosene
Methane -
Methyl alcohol(Methanol)
water(24)
Water(100) - -
Sea water - -
Bunker oil - - -
Benzene(Benzol)
Butane
Fluorine -
Boric acid
Carbon tetrachloride
Oxygen
Petroleum - -  
Salt water - -
Soda ash(Sodium carbonate)
Calcium hydroxide
Hydrogen
Marcury - -
Steam(150%) -
sodium cyanide -    
Vegetable oil - -
Salt water - -
Silicone greases - -
Silicone oil - -
Acetone
Sulfurous acid gas - -
Ammonia
Liquiefied petroleum gas(LPG)
Ethyl alcohol(Ethanol)
Lye solution - -
Hydrochloric acid(10%,20) - -
Hydrochloric acid(20%,20) - -
Hydrochloric acid(20%,80)
Hydrochloric acid(38%,20)
Ammonium chloride
Kalium chloride
Calcium chloride
Ozone
Olive oil
Sulfur
Sodium phosphate
Ammonium phosphate  
Ammonium nitric
Nitrogen
Natural gas
Acetic acid(10%,20)
Acetic acid(50%,20) - -
Acetic acid(50%,70) - -
Acetic acid(100%,20) - -
Ketones   -
Cresol
Chromic acid(2%,70) - -
Chromic acid(10%,70) - -
Chromic acid(25%,70) - -
Chromic acid(2%,50)
Soybean oil
Toluene
Glucose
Propane
Castor oil
Sulfuric acid(10%,20)
Sulfuric acid(10%,70) - -
Sulfuric acid(30%,20) - -
Sulfuric acid(30%,70) - -
Sulfuric acid(98%,20) - -
Aluminium sulfate
Aluminium sulfate
Potassium sulfate
Hydrogen sulfide

  •  : Very acceptable,  : Acceptable,  : Slightly unacceptable,  : Very unacceptable.
  • Differences in data can exist due to extended duration and elevated temperature (Standard data reflects use at ambient temperature.)
  • Consult our representative when using unsuitable liquids.
Resistance of chemical characteristics for Tube
Name of chemicals Polyethylene Remarks
Air  
Alcohol  
Ammonia gas  
Ammonia liquid high temperature 
Beer  
Benzine  
Bromine liquid  
Carbon dioxide gas  
Caustic soda  
Desel fuel  
Ethyl alcohol high temperature 
Fluor gas, dry  
Fuel Oil  
Hexane  
Hydragen gas  
Lighting gas  
Mercury  
Methanol(Methyl Alcolhol)  
Milk  
Molasses  
Nickel Salls  
Oils Essential  
Propane gas  
Spindle Oil  
Water Pure  

  •  : Very acceptable,  : Acceptable,  : Slightly unacceptable,  : Very unacceptable.
  • Differences in data can exist due to extended duration and elevated temperature (Standard data reflects use at ambient temperature.)
  • Consult our representative when using unsuitable liquids.


The right choice for high quality products

Liquid Connections Pty Ltd

Link & Partners

Contact us
If you have any enquiries, please do not hesitate to fill out this form. We shall get back to you as soon as we can


CONTACT INFORMATION